Minimally invasive surgery (MIS) applications require lightweight actuators that can generate a high force in a limited volume. Among pressure driven actuators, fluid elastic actuators demonstrate high potential for use in the medical field. They are characterized by nearly no friction and wear and they can be made of low-cost biocompatible elastomers. However, when compared to traditional piston-cylinder fluid actuators, fluid elastic actuators often result in smaller output forces as well as weaker return forces. This work is about the design of a linear elastic actuator (LEA) which is able to develop relevant pulling-pushing force in one direction. The LEA is composed of entirely disposable materials and it requires a simple manufacturing process. Thanks to its design, the LEA can be compared to traditional piston-cylinders actuators in terms of output forces (up to 7 N) with the advantage of using relative low working pressures (0, 2 MPa). The actuator has been used for the actuation of a gripper for MIS, as a case study. The whole range of gripping forces developed by the tool actated by the LEA has been evaluated, thus verifying that the gripping device, is able to meet the force requirements for accomplishing typical surgical tasks.

A novel linear elastic actuator for minimally invasive surgery: Development of a surgical gripper

GERBONI, Giada;BRANCADORO, MARGHERITA;TORTORA, GIUSEPPE ROBERTO;DIODATO, ALESSANDRO;CIANCHETTI, Matteo;MENCIASSI, Arianna
2016-01-01

Abstract

Minimally invasive surgery (MIS) applications require lightweight actuators that can generate a high force in a limited volume. Among pressure driven actuators, fluid elastic actuators demonstrate high potential for use in the medical field. They are characterized by nearly no friction and wear and they can be made of low-cost biocompatible elastomers. However, when compared to traditional piston-cylinder fluid actuators, fluid elastic actuators often result in smaller output forces as well as weaker return forces. This work is about the design of a linear elastic actuator (LEA) which is able to develop relevant pulling-pushing force in one direction. The LEA is composed of entirely disposable materials and it requires a simple manufacturing process. Thanks to its design, the LEA can be compared to traditional piston-cylinders actuators in terms of output forces (up to 7 N) with the advantage of using relative low working pressures (0, 2 MPa). The actuator has been used for the actuation of a gripper for MIS, as a case study. The whole range of gripping forces developed by the tool actated by the LEA has been evaluated, thus verifying that the gripping device, is able to meet the force requirements for accomplishing typical surgical tasks.
2016
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11382/510189
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 15
social impact